1-1/4” laminated insulated bunkend

• Double the industry standard thickness
• Solid wood, steel reinforced frame filled with 1” thick high density foam and laminated with wood panel on top and bottom
• Yields a more stable bedend vs. chipboard or spliced plywood used by other brands
• Insulation improves comfort and warmth

Double Wide Lift Arms & Tent Storm Cuff

All Clippers come standard with double wide lift arms and corner safety channels (2 channels per unit). This system provides the strongest and safest roof support structure in the industry.

Great looks and function. The full perimeter storm cuff on the Clipper tent guides water down and away from the unit and does not allow it to collect on the sidewall caps or around the beds. This additional material also gives the tent a better fit around the unit to keep bugs out.

• Z-Rails on roof perimeter and sidewalls keep wood above water level collection points.
• Others use U channel where wood and water can come in contact at the bottom of the channel.
• Channels are kept open to allow water to run out like a gutter.
• Others attempt to seal channels to keep water out; when the seal is compromised, water will collect and cannot escape.

• No one else includes the extra wood layer between the top Filon and internal foam that provides stiffness and reduces the probability of damage due to hail, road debris, etc.
• Roof vent is placed off to the side so the A/C can be centermounted without having to remove the vent. This design allows you to have both the vent and A/C.
• The roof is framed with steel supports to accept A/C on all models without extra reinforcement.
• Covered with a seamless Filon exterior.

A. Ceiling Board
B. Wood Frame & Foam Roof Structure
C. Dura Tuff Wood Protective Layer
D. One Piece Seamless Filon Skin

Better safety & stability on the road

• Widest stance of any folding camper
• Improves towing safety and stability
• Stronger axle beams than most competitors
• Steel frame with automotive E-coat finish. E-Coat is a 12 step cleaning and finishing process that applies multiple layers of protection to fully penetrate and coat INSIDE and OUT. Powder coating used by some competitors cannot cover inside surfaces.